Skip to main content
Stesso

Drill Studs for New Wiring

1:56
39:51
184K views

At 1:56 in

Rewiring New Electrical in an Old House

Watch on YouTube

What happens here

Using a cordless drill with a spade bit, drill holes through the studs in strategic locations to accommodate the new electrical wires. The worker begins in the kitchen, carefully measuring and marking positions for new outlet boxes for the kitchen island, various countertop appliances, the dishwasher (requiring a dedicated GFCI circuit), and the garbage disposal (also a dedicated GFCI circuit). Receptacle heights are generally targeted at 43 inches from the floor for countertop outlets. This step ensures all wiring paths are clear before running the new cables.

Tools and materials

  • Cordless Drill
  • Pencil
  • Spade Bit
  • Tape Measure
  • Utility Knife

What they say

Hide

the house. So, the plan here is going to be we're going to have a big island here, or at least countertops. We're going to put one in the middle over here. It's going to be 4 ft wide. We're going to put one right here just so you can use appliances. We're going to have our dishwasher here. So, we're going to have to have its own independent circuit, GFCI. Then, we're going to have one for the garbage disposal, also GFCI. And then we're going to put one here. Again, appliances. We're going to have our cooktop range right here. And of course, plant couple here. Now, also there's a refrigerator. The refrigerator is going to be over here. We're going to have this big builtout section. The refrigerator has to have its own independent circuit as well. Plus, we'll mount another one in case we want to put like a coffee maker there or something like that. We got a lot to work. I got a spade bit. Let's start drilling and mounting our receptacles.

Auto-generated from the video audio.