Skip to main content
Stesso

Prepare Sealer and Tools

1:18
13:53
31.3K views

At 1:18 in

Restoring colored or stained concrete. Fast and Easy steps!

Watch on YouTube

What happens here

Wear protective gloves before handling the sealer. Place a roller pan on the ground. Open the oil-based concrete sealer, specifically the 'ClariShield' product, and carefully pour it into another container through a strainer. This step is critical if reusing leftover sealer or working with product that may have accumulated leaves and debris, ensuring a clean and smooth application. Only use disposable brushes and roller covers, as they are not worth cleaning after using an oil-based product.

Goal: Put on protective gloves, prepare a roller pan, open the oil-based concrete sealer, and strain the product to remove any debris or contaminants.

Tools and materials

  • Disposable Chip Brush
  • Roller Frame with Extension Pole
  • Roller Pan
  • Protective Gloves
  • Strainer

What they say

Hide

this is an oil-based product agency called Claire shield and it's a concrete sealer that adds a wet look I'm just used throwaway tools when doing that because I'm not going to try to clean anything when I'm done I'm just going to throw away my brush throw away my roller cover also so we'll be using a Premier white woven 3 8 inch roller to apply it just use like a 3 8 inch or half inch gonna be using just a chip brush to do the cut ends so I'm just straining this we're working at another job site this was the leftovers got a lot of leaves and debris in it so I'm just straining all that stuff out

Auto-generated from the video audio.