Prepare Edges and Clear Debris

0:08

13:53

31.3K views

At 0:08 in

Restoring colored or stained concrete. Fast and Easy steps!

Watch on YouTube

What happens here

Begin by using a Milwaukee battery-operated edger to create clean, sharp edges along the perimeter of the stamped concrete. This prevents grass and dirt from mixing with the sealant product during application. After edging, thoroughly blow off all loose debris, dirt, and leaves from the entire concrete surface using a leaf blower to ensure a clean area for sealing.

Goal: Before applying the concrete sealer, use a battery-operated edger to trim grass along the concrete's perimeter and then use a leaf blower to clear all debris and dust from the surface.

Tools and materials

Leaf Blower Milwaukee

What they say

(624 characters)

Hide

so today I'm going to be doing a wet look on this concrete right here so it's a stamped concrete right here stain that the stain is was added to the concrete we're going to be doing a wet look it's going to bring back some color and add Sheen to it and prior to doing that because I want to get my edges done I take a Milwaukee yo just battery operated edger and I'm going to Edge this and then I'll blow it off that way um I can get my edges done and there's not going to be grass and dirt getting in mixed in with my my product my clear coat so just gonna do this edging real quick here and then we'll begin the clear coat

Auto-generated from the video audio.