Apply First Primer Coat (Brushing Method)

You can brush it off. You can roll it off. Ah, we've found that brushing is the best way to apply it, and you want to get it under all these folds. Because all these folds are open and need to be bonded back together. Also, if you're working on a house like this, you have to bid properly because this is a very time-consuming job. If you own a home, this is one of the reasons why you want to paint when you should be repainting your house. Sometime between 9 and 12 years, you should be repainting. If you allow it to get like this, it's just going to cost you $ 2,000 to $3,000 more to repaint your house. This is a product that I've been using for years, quite a few years. Usually, on almost every house here in Idaho, I'm going to use either a half-gallon to a gallon. This whole thing is going to take several gallons, so this is how it's applied. We're using a Chinex filament brush. My GoTo brush, when I'm using Pill Stop, is just a 3.5- inch angled guillotine brush. It gives me the ability to get under the turns very easily. You want to make sure you're brushing everything, so anything that's supported, anything that's open. This is probably one of the worst I've done before. Over here, we're down to just almost pure cardboard. Right here, it's going to be a bit like sandpaper