Skip to main content
Stesso

Service Main Sprayer Filter

6:11
7:30
110.2K views

At 6:11 in

Repair A Graco 695 Airless Paint Sprayer Not Priming Properly.

Watch on YouTube

What happens here

Once the housing is removed, the filter can be pulled out. Take the filter to a hose and thoroughly rinse it out, squirting water through it until all paint and debris are removed and the water runs clear. Also, check inside the cap for any debris. If the filter is damaged, torn, or severely clogged and cannot be cleaned effectively, it should be replaced with a new one.

Goal: Ensure the main filter is clean and allows proper paint flow.

Tools and materials

  • Hose — To rinse the filter, Sprayer Filter Graco used for The component being cleaned or replaced (part of the sprayer)

What they say

Hide

to be put on there with a wrench and tighten down with a wrench. Just needs to be handtight. Just going to pull that off. Now, here's your exposed filter. That filter will actually just come free. And that filter, you want to take it out to a hose and squirt it off really good. Clean it out really good. Make sure there's no debris up inside your cap. Going to put that filter back on. Going to stick it down inside. And I I like to take around my threads

Auto-generated from the video audio.