Replace Needle and Ball with Kit

divots on that ball i'm going to replace that ball here's my titan repacking kit so the titan repacking kit comes in this kit i've got the kit i purchased today i purchased this kit and it cost me 20.99 for this kit it came with instructions it comes with two tools you've got to have these tools and it comes with a new needle that has a new ball on it don't want to lose that thing it's very small there's no way you can replace this new needle without these two tools now i'm going to take this gun needles exposed this first tool just drops in here and it's just going to drop in place where it falls all the way down i'm going to turn it until it falls into place right there fell into place now i know i can see it's flush right there it looks like a propeller on the airplane that cannot move or it's going to change the adjustment that's set at factory of that needle that's inside there if you turn it one way or turn it the other way it's going to affect the adjustment of the needle and you could get some leaking of your gun after you release the trigger hold that in place it's going to hold in place i'm going to drop this other little allen wrench tool down inside here i'm going to get it on my needle it's set on my needle now i'm going to hold that in place unloosen my needle i can turn it until i feel it comes loose and now there it is there's the end of the needle right there i just take my new one drop it into place it's going to drop in place just like this and then i'll just take and re-tighten it back up and there you go now if anything happens if this moves always keep it a reference of where it was i can see it's about maybe like 10 o'clock if you look at it like a clock that's 10 o'clock there that could be three or four o'clock that side i don't want that to change otherwise you'll change the adjustment of that now i'm going to take my gun squeeze my trigger make sure my seat is still up inside there i can see it's there tighten it up put my trigger guard back on put my gun back on and away i go now i'm going to hook it up to my airless sprayer test it to make sure there is no leaking if if there is leaking if this gun