Skip to main content
Stesso

Select and Position Heat Shrink Tubing

0:33
1:26
3.8K views

At 0:33 in

Quick Fix For A Cell Phone Charging Wire! #diy #homerepair #hacks #helpingothers

Watch on YouTube

What happens here

From the heat shrink tubing kit, select a piece that is large enough to easily slide over the connector of the charging cable but will shrink down tightly. The narrator specifically uses a piece of the 4-to-1 ratio heat shrink tubing. Slide the chosen tubing over the metal connector end of the cable and position it so that it covers the entire plastic part of the connector and extends slightly onto the cable itself, encompassing the area prone to bending and breaking.

Goal: Choose an appropriate size of heat shrink tubing from the kit and slide it over the cable's connector end, positioning it to cover the vulnerable area.

Tools and materials

  • Charging Cable
  • Heat Shrink Tubing (4:1 Ratio)

What they say

Hide

got off a Amazon. You guys are looking for something like this. You can check out my Amazon store. I'll put a link in my bio. You can check out my link tree. I actually feel like I paid more for this than I did for this whole box right here. So with the 4-to-1 shrink ratio on this, I should be able to put this on here and it'll secure up nice and tight. You just need a little heat source. I grabbed my torch. I don't know if you can see that but there's a little bit of adhesive

Auto-generated from the video audio.