Control Staining Pace

level horizontal position so another tip I want to give you when using the expert staining machine is we're sitting in our lumber you know in a flat level horizontal position we've got our valve set up so it's loading our rollers across here evenly do not try to send your pickets through too fast and you'll learn like a proper pace and a proper flow right here as the the pick it comes through if it's completely saturated from the front to the back in all sides you got everything running uh smoothly now if you're back brushing that board at the end you're sending it too fast sending it through too fast or your valves aren't open you know wide enough if your valves are open all the way your Reservoir is completely full here spilling out you're still having to back brush it then you need to just slow down your pace of running your pickets through I typically have my valves open halfway and then I'm sending a picket through probably about you know this pace I'm probably just running it through this pace I'm watching it and I'm just watching this pick go through every single time if I see that it's dry on the back it's got to be back brushed next time I'm just going to slow it down a little bit so you can't just not pay