Position and Adjust Jig for Plumbing

your measurements onto the back of your cabinet. You don't even need to find your measurements or the dimensions from your pipes coming out of the wall. You just need to locate them. You're going to place this on your mark line on the wall where the top of the cabinet's going to be. And then you're going to pull these down. All of these adjust down to any orientation. You're gonna tighten these stainless knobs. >> Awesome. >> Those give you a little bit of a setback so you can go and mark. And then you're going to use your uh your forstenner bit that's going to go up into that and your your hole saw. And that's going to guide