Prepare Airless Sprayer for Elastomeric Paint

3:52

7:36

157.3K views

At 3:52 in

Painting Stucco & Repairing Cracks With Caulking & Elastomeric Paint

Watch on YouTube

What happens here

Set up an airless paint sprayer (e.g., Titan 1140) with the appropriate tip and pressure for elastomeric paint. The video recommends a 621 or 623 tip to handle the paint's thickness and setting the pressure to approximately 2200 PSI. Ensure your gun and machine filters are changed to a 30-mesh filter, as thicker paint can clog standard 100-mesh filters.

Goal: Configure the airless sprayer for optimal application of thick elastomeric paint.

Tools and materials

30-Mesh Filter — Replacing standard filters to prevent clogging with thick elastomeric paint
Airless Paint Sprayer Titan 1140 — Applying the SherLastic elastomeric coating to the stucco
Spray Tip — To handle the thick viscosity of the elastomeric paint

What they say

(1,043 characters)

Hide

hairline cracks. So, here's a look at our 1140. We got it set up right here uh spraying this Sherastic uh product right here. And here's a look. It's a shastic and it's an elastic coating from Sherwin Williams. Got it tinted to the color the customer wants and 1140 setup right here. 2200 PSI using 621 and a 623 tip to actually spray this product. So, this is all the setup right here. Closer look of our Titan 1140. Can easily set the pressure to the what we want cuz it's got a digital readout on it. Try to give you a close look of how thick it is on here. Spray it on extremely thick. You go a lot slower than you typically would with a regular airless spray and spraying regular paint. So you get a really good thick mill thickness. Stuff supposed to go on 20 ms thick. So, some of the key points while you're spraying this stuff, just make sure you go extremely slow. So, you can watch in the video, watch us spraying it. We're going probably twice as slow as we typically would on a regular house because you got to get that buildup on

Auto-generated from the video audio.