Repair Stucco Before Highlight Application

3:34

8:49

75.1K views

At 3:34 in

Painting Stucco. Adding accent colors to stucco trim.

Watch on YouTube

What happens here

Inspect the stucco surface of the highlight band for any 'dings and nicks' or other imperfections. Apply a vinyl stucco patch to these areas to create a smooth and even surface for the highlight paint. Use a putty knife or spreader to apply and smooth the patch. Allow the patch to dry completely according to manufacturer instructions before proceeding to painting. The masking tape from the previous step should already be in place.

Goal: Prepare the stucco surface by patching imperfections for a smooth highlight finish.

Tools and materials

Putty Knife / Spreader — Applying and smoothing the stucco patch
Vinyl Stucco Patch — Filling in dings, nicks, and other imperfections in the stucco

What they say

(538 characters)

Hide

Now working on our stucco highlights. We're running our 9 in paper and 1 in 2020 tape along the top where we want our nice crisp line to be. And then we're going to spray the Stucco bottom band with the Rackex 310 tip. So we run it around, mask it, do any repairs with Stucco repairs with Stuckco patch, and then we're going to get ready to spray with the 310 tip. We've gone around and used a vinyl stucco patch for areas that have dings and nicks in it prior to actually doing our highlight color. Now, we've got our Stuckco masked off,

Auto-generated from the video audio.