Mask the Highlight Band Area

going to be a highlight. So now we got our body here on this side. We've got the body color painted here and down here. And this is going to be our highlight band. And I can actually use a cardboard shield and shield here to spray this with a RAX 310 tip. But I want a nice crisp clean line right here. So I'm going to use a 3M hand masker. And last, I do like to move from right to left cuz it's a lot easier to mask right to left. Otherwise, if you go from left to right, you have to mask upside down. So, I'm going to make a run. I'm going to tack my paper up. When we spray that, it's going to make a nice crisp, clean line right here. And once we spray it, we'll remove it while the paint is still wet. Hang on. I'm going to continue this whole run right here and then masking it and then we're going to spray it. Now working on our stucco highlights. We're running our 9 in paper and 1 in 2020 tape along the top where we want our nice crisp line to be. And then we're going to spray the Stucco bottom band with the Rackex 310 tip. So we run it around, mask it, do any repairs with Stucco repairs with Stuckco patch, and then we're going to get ready to spray with the 310 tip. We've gone around and used a vinyl stucco patch for areas that have dings and nicks in it prior to actually doing our highlight color. Now, we've got our Stuckco masked off,