Skip to main content
Stesso

Install Auxiliary Handle

0:22
1:11
3.3K views

At 0:22 in

Out Of The Box And Ready To Use In Under 5 Minutes! #diyequipment #powertools @MilwaukeeTool

Watch on YouTube

What happens here

Take the auxiliary handle and the mounting clamp pieces. Insert one side of the mounting clamp into the handle. Position the handle on the main shaft of the trimmer at a comfortable operating height. Place the other half of the mounting clamp on the opposite side of the shaft, aligning it with the handle. Insert the nuts into the hex-shaped holes on the handle, ensuring they sit flush. Insert the screws into the corresponding holes from the bottom of the handle, ensuring they engage with the nuts. Hold the nuts in place while tightening the screws evenly with the Allen wrench until the handle is firmly secured and straight on the shaft.

Goal: Attach the auxiliary handle to the trimmer shaft

Tools and materials

  • Allen Wrench Milwaukee — Tightening the screws
  • Auxiliary Handle Milwaukee — Providing an additional grip point for better control
  • Milwaukee Quick Lock String Trimmer — The main shaft of the trimmer
  • Mounting Clamps — Securing the handle to the shaft
  • Nuts Milwaukee — Receiving the screws for tightening the handle
  • Screws Milwaukee — Fastening the handle

What they say

Hide

We'll install our handle. This is handle goes right here. You want to put one side of the mounting clamp in the handle. The other side goes on the other side of the bar and then you take your nuts and stick them in the hex shaped holes to be able to screw on the hand. Screws go in the bottom of this. Make sure you hold that nut on because you want these to tighten up evenly. Make sure it's straight on there and we'll give it the final tighten.

Auto-generated from the video audio.