Replace Filters and Refill Engine Oil
2:59
6:42
112.6K views
At 2:59 in
NO OIL CHANGE FOR 9 YEARS!! SEE THE CHUNKS!!....DANGER!! CLOSE CALL LOADING UP!
What happens here
After draining the old oil, the next step involves replacing the fuel filter and the engine oil filter. Don points out the fuel filter (a Wix 33195) and notes that newer models might have a water drain valve at the bottom, which this older filter lacks. He mentions that both filters will be removed and new ones installed by hand-tightening. The air filter is also inspected for debris. Finally, the engine is refilled with 7.5 quarts of new engine oil through the oil filler neck.
Goal: Install new filters and replenish the engine with fresh oil.
Tools and materials
- Air Filter — Inspected for cleanliness and replaced if necessary
- Bobcat 773 Skid Steer Bobcat — The machinery being serviced
- Funnel — To prevent spills when adding new oil
- New Engine Oil Filter — To filter engine oil
- New Fuel Filter Wix 33195 — To filter fuel before it reaches the engine
- Oil Filler Neck — Point of entry for adding new engine oil
- Oil Filter Wrench — To loosen old oil filter and ensure proper tightening of the new one
- Engine Oil — To lubricate the engine