Inject Tire Sealant into Deflated Tire

out of this tire okay all right now that the tire is flat now this may be what your lawnmower looks like already if it does no matter what position you're in you can always instill some stan's no tube so what we're going to do i keep calling it stan's no tubes because i'm so used to calling it that from the mountain bike world this is called stan's tire sealant we're going to pop this guy open actually shake so it says to turn upside down and shake it vigorously to activate this and what's going to happen is it's going to splash around the inside of the tire and it leaves a latex rubbery layer inside there very very cool i believe it's silicone all right now that our tire is flat and your tire may already be flat don't worry there there is a saving grace for you here so we'll go ahead and we'll remove our tile tire sealant applicator just like so and this screws right onto your valve stem okay this is a product that you need to buy in fairly large quantities if you have a lot of equipment okay so this is going to take that 13 ounces all right here we go we're going to put the tube on we're just going to turn her upside down i'll give you a little hint before you put the tube on mash a little air out of the tire right here okay get a little smooshy and then put your tube on okay there we go so we don't get any back pressure we're gonna put the full 13 ounces in this critter this is a 16 ounce container looks kind of like milk going in there no mess whatsoever awesome so once we get to the 13 mark which we're almost there there we are 13. okay so we're gonna raise this guy up tip it back like this let all that stands run down that tube set our stands to the side