Convert to Extension Ladder Configuration

What happens here

Begin with the Little Giant King Kombo ladder in an A-frame (stepladder) configuration, which is its self-supporting form. Locate and unlock the pivot points or hinges that allow the inner section of one side to extend. Carefully extend this inner section upwards, guiding it along the outer rails until it audibly clicks or visually locks into place, forming a straight extension. Once extended, lean the entire ladder against the desired work surface, such as a house wall or structure, ensuring it is at a safe climbing angle (approximately 75 degrees from the ground) and that both feet are stable on the ground surface. Confirm all locking mechanisms are fully engaged before proceeding.

Goal: Adjust the ladder from an A-frame to an extension ladder to reach higher areas.