Cordless SDS-MAX Rotary Hammer Race

so this is okay so what are we looking at with this one stage so this is the grh06 this is makita's new 80 volt two batteries running 240 volt max batteries giving you 80 volts of max uh performance this tool right here got anti-vibration technology which you can actually see on the exterior corner here you can see the exterior of the movement on the actual tool and then on the interior here we have a counter balancing system that actually takes all the impacting energy and it puts it right into the work area not the person using the tool another great feature on here is we've got aft and that's active feedback sensing technology when this tool is in a forward motion it will not bind up and show it it's having any problem but the minute it has an impact it should have been right there there it went right there aft back your feedback tension up technology sense that we are going to give a binding situation which can cause an injury or do damage to the tool so it actually kicks off at that point shuts down take your finger off the trigger and then you can go back at it again okay does any of these have the anti-abt technology so they have some adr the lt does have an anti-rotation so they've got the anti-rotation so basically if it does bind it will stop but it's not quite as fast as ours it's also not an electrical so we're gonna do a bosch corded hilti corded and makita's new battery and we're going up to the yellow lines on the blades let's just take a look are these all the same yeah there's no and how about these drill bits and have these all been the same drills all six cutter bits by makita brand new lineup for us all of them have the same bits in them they're all brand new what we can do after we drill the first time with the cordless unit here we're going to switch out the bits and we're going to bring their bits from the other the healthier the bottom put it in here awesome and then we'll do another we'll do another round so i can see that they've drilled two holes and this one's drilled four so far this morning yes okay just playing around with it so we'll do a quick race here and we'll show how we're actually outperforming and exceeding quartered expectations perfect all right on three [Music] one two three so almost uh one and three quarter holes we've performed against the quarter let's switch blades yeah right now