Skip to main content
Stesso

Drill Hole for Invis Stud

0:57
1:02
4.4K views

At 0:57 in

Never See A Screw Again! #woodworking #awfs2025 #diy #diywoodworking

Watch on YouTube

What happens here

Similar to drilling for the screw, a second wooden piece (rectangular, in this case) is prepared by drilling a hole using the specialized drill with the magnetic driver attachment. This hole is designed to perfectly fit the Invis stud, which will act as the receptacle for the Invis screw from the first piece. The careful alignment and precise drilling ensure a strong and invisible connection when the two pieces are joined.

Goal: A hole is drilled into a second wooden piece, which will house the Invis stud, completing the preparation for an invisible joint.

Tools and materials

  • Magnetic Driver Attachment Lamello — Guides the drill bit for the stud hole
  • Specialized Drill Bit Lamello — Creates the correct size and depth hole for the Invis stud
  • Specialized Drill Festool — Drilling the hole for the Invis stud
  • Wood Piece N/A — The second component of the joint, receiving the Invis stud

What they say

Hide

screw itself that makes the screw turn. So, that screw is in here. On the other side, all I need is the right size thread that is matching this and I can make sure that these two things tighten

Auto-generated from the video audio.