Skip to main content
Stesso

Assembling the EarthQuake Auger System

11:00
27:17
44.3K views

At 11:00 in

Neighbor DROPS a NASTY surprise!

Watch on YouTube

What happens here

The EarthQuake Dually 52cc 2-stroke auger system is prepared for digging. This involves first removing the existing smaller auger bit by unfastening a small clip and pulling out a pin. Once removed, a larger 5-gallon auger bit is attached using the same pin and clip to ensure it's securely in place.

Goal: Attach the appropriate auger bit for digging tree holes.

Tools and materials

  • 5-gallon Auger Bit EarthQuake — Digging the large holes for the trees
  • Clip — Securing the auger bit to the unit
  • Pin — Securing the auger bit to the unit

What they say

Hide

we're going to use the new earthquake augur bigger with the 5 gallon bit I just got to swap out this bit right here that's on the thing right now Bo then I went this morning ran to daners here's and got a yard of pulverized need the black dirt cuz we're going to line the holes with that after we dig the holes nice good nutrients to get into cuz soil around here is not great as for getting stuff established all right I'm going to swap out this so it's it's pretty easy you just flip this little clip pull it out see it's a little cliping pin slide that right off side that [Music] direction should just pin right in place and there we [Music] go and then back in place now she's locked in that's off we get this fired up go from there

Auto-generated from the video audio.