Install the Leveler Feet

going to go inside is one thing i don't have to read instructions for right now it goes right inside there one of your feet all right so i'm ready to go on to the next step i believe we're gonna start mounting these feet on here which is the exciting part so here we go we're going to put our rod in one of our feed here and then gonna put this through i believe it's the bottom rung right through here we're gonna put it right through there um get our bolts lined up with our holes got my foot pushed in there now this is when i start putting some of these screws together just like it explains to me so i've got um these little brackets are going to go in between my screws and my nuts actually screws but nuts all right so we've got to our legs the screws coming through now we're going to be sticking these brackets i guess is what we can call them put these brackets on each side we're going to be putting a nut down each one of these bolts we're gonna screw those tight or not necessarily screw them tight but i'm gonna use a i believe that's probably our three-eighths um three-eighths or seven sixteenths that's a seven sixteenths all right now i've got two i've got the one foot installed i have to verify that my shaft length is correct and so now they've got this handy little template that um