Identify and Cut Out the Correct Template

and there we go all right our next step in the process is i've got to locate my templates i've got multiple templates right here but only um one of the templates are for the ladder that i'm using i've got a d series um 1200 series ladder and that is going to be template number two for me and so i'm going to be cutting out template number two and there's a right and a left of both of these so i'm going to cut these things out and then the rest of them can just be discarded you're not going to need them for anything so i'm just going to be cutting along the dashed line here make sure you know exactly where you're supposed to cut it explains in the instructions [Music] all right here's another step i'm going to be working with my right side rail so make sure when this ladder is standing up right side rail is the same this rail on your right side so the feet um are in the up position spikes down i know this is i'm facing the ladder right here so i know this is the right side um it was upside down the feet would be opposite so i just get that correctly so here's my right side we'll be working with the right side first so i got my right template this is um where the line comes into place that you draw on when i'm setting up my template right here there's also i do need to cut out the center portion of the template which i forgot to do there's a little square right inside here it says cut along these dashed lines so i'm going to carefully cut along that because there's some really important lines on this template that line up with that line you drew and you have to be able to see through um your template and see the rung so here's um i got my template right