Masking the Right Side of the Large Window

just wanna make sure that line is perfect. The last window I was doing, the wind was blowing this direction. So we'll see where it catches my plastic. So the wind's pushing it up against the window. So I'm gonna move over to this side. It hasn't picked it up yet. So I'll quickly grab it, tack it down. You can see I've got about three quarters of an inch from my window to my plastic. If it's out too far, you're gonna have to run multiple rows of tape. Now I'm gonna move down because I got a larger window. I gotta work on and off of a ladder. I'm gonna pull this over, pull it tight, tack it down, and fill this in. I'm gonna come over to this side. I'm gonna pull this down. I'll work from the bottom up. So I'm gonna come across. I'm gonna tuck that up underneath. Just sitting it up, way up inside. I'm gonna show you what I'll do as I'll grab. I'll come here. I'll put touch my plastic on there. Now I'll raise it up to the line I want it to. So I'm gonna touch the plastic. It's gonna stack onto the tape. Now I'm gonna find that line, fill the corner in, make sure there's no leaks right there. We've got one more side right here. Gotta come up on the ladder. Check it out. Everything's tight. You don't see anything.