Skip to main content

Controlling OVERSPRAY with paper! Tips spraying interior walls. #tips #howto #diy #paintingtips

1:03
21.5K views

Video by The Idaho Painter

The Idaho Painter

What happens here

This video demonstrates effective masking techniques using painter's tape and masking paper to protect adjacent surfaces during a painting project. While the video specifically shows masking a wainscoting panel and electrical outlets on a wall, the methods employed are directly transferable to protecting exposed plumbing pipes from paint overspray, dust, or debris. The process involves precise application of tape and paper to create a barrier, ensuring clean lines and preventing unintended paint marks on areas that should remain unpainted.

Transcript

Hide

That little flap when you come up that flap will keep overspray from shooting up the wall. Use an Onita fine sanding sponge, square sanding sponge. You just want to sand these nail heads flat. You know, I just take a roll of tape, inch and a half tape. I'm just going to put um a piece of tape on there. So, I usually put a piece of tape to the edge. I want any overspray on the side. So, both edges.

Auto-generated from the video audio.