Skip to main content

Rivnuts: Reusable Threads Without Backside Access

0:43
1:09
146.6K views

At 0:43 in

Metal fasteners

What happens here

For situations requiring reusable threads in metal where access to the backside is not possible, rivnuts (also known as threaded inserts or nutserts) are demonstrated. The creator first shows a rivnut and a bolt, emphasizing the importance of matching the thread size between the two. A hole is drilled into the metal sheet with the correct size drill bit for the rivnut. The rivnut is inserted into the hole, and a rivnut tool is threaded onto the rivnut. The handles of the rivnut tool are squeezed, collapsing the rivnut on the blind side and creating a secure, threaded anchor point. Once installed, a bolt can be easily threaded into the rivnut, creating a strong and reusable connection that can be assembled and disassembled as needed without requiring backside access.

Goal: Learn to install rivnuts to create reusable threads in metal without backside access.

Tools and materials

  • Bolt — To be threaded into the rivnut after installation
  • Drill Bit — Creating the correctly sized hole for the rivnut
  • Drill — Drilling the correct size hole for the rivnut
  • Rivnut Tool — Installing rivnuts by collapsing them
  • Rivnut — Creating reusable threads in metal from one side
  • Sheet Metal — The material being fastened

What they say

Hide

And it's easily removable whenever you need to. But, what if you can't get to the backside? That's where rivnuts come in. They're reusable threads without needing access to the backside. Make sure that you match the thread to your bolt. Drill the correct size hole, insert your rivnut, thread on your rivnut tool, and squeeze the handle till it collapses. And now you got these threads that you can use over and over again. And there you have it. Four different ways to fasten metal, all with their own purpose. Anyways, I got stuff to do.

Auto-generated from the video audio.