Skip to main content
Stesso

Bug Overhead Service to Utility Lines

8:37
12:36
7.9K views

At 8:37 in

MASTER ELECTRICIAN DAD TEACHES HIS SON A 200 AMP SERVICE!

Watch on YouTube

What happens here

After all the electrical work is completed, including the installation of the new meter/disconnect combo, the main panel inside, and the grounding system, the final step involves 'bugging' the overhead service to the utility lines. This is a temporary connection, often required for inspection, before the utility company makes the final, permanent connection. The electrician uses temporary bugs (connectors) to join the prepared service conductors from the weatherhead to the existing overhead utility lines. The video emphasizes using proper techniques like securing one wire at a time and ensuring no loops are created. Because this is a temporary connection for inspection, simple bug connectors are used, and tape is applied for basic insulation, noting that a more permanent bug would be used for the final connection by the utility company. The neutral conductor is explicitly noted as not needing tape.

Goal: Temporarily connect the new service to overhead utility lines for inspection.

Tools and materials

  • Allen Key — Tightening the bug connectors
  • Black Electrical Tape Scotch 33 — Insulating the temporary bug connections
  • Ladders — Accessing overhead utility lines
  • Temporary Bug Connectors — Making temporary connections to overhead utility lines

What they say

Hide

Now, put in one panel with all breakers. Dad, any tips on bugging a service? One wire at a time. Okay. Um, for a beginner, is this for a beginner electrician? Well, residential is a beginner electrician, right? So, one wire out at a time. Okay. Obviously, this you'll never probably run against. This is something totally unique. Okay. And uh all this is going to have to be replaced once we get our inspection. So, this is something totally different. Yeah. Normally, you would use a different type of bug. Could be a more permanent bug, but since this is going to be changed, I mean, I put that tape on there because the wire was just so out of shape, right? So, I push that in all the way. my allens out. Now, as long as I don't create a circle Mhm. I don't create a loop, a current circle. I'm holding on. It's insulated here. Right. Got my hand holding the wire. I got nothing in the way. Also, this thing closed. Then I'll tape it up. Now, here I like to use a rubber tape. Okay. Good Scotch 33. The only one you don't have to tape is the the neutral. Yeah, the neutral. You don't have to tape. It's open open conductor. All right. So, my pops got the service bug, the two hots in the neutral. Now,

Auto-generated from the video audio.