Skip to main content

Showcasing Limbsaw Tree Trimming Attachments

1:53
10:00
17.4K views

At 1:53 in

Look what I found! Best of the National Farm Machinery Show 2024!

What happens here

The host visits the Limbsaw Company booth to showcase their tree trimming attachments. The LS8 model, a chainsaw attachment with a 20-inch bar and self-oiler, is introduced. It typically comes with an 8-foot boom and attaches to any tractor bucket or quick-attach plate. The chainsaw requires 7 gallons per minute of hydraulic fluid for lubrication, and one quart provides enough lubrication for approximately 200 cuts. A quick-attach plate allows easy swapping between the chainsaw and a circular saw attachment. The circular saw, designed for material up to 5 inches in diameter, is described as ideal for clearing areas at the edges of pastures. The chainsaw is for larger branches up to 12 inches. Both attachments utilize a hydraulic dampener to absorb stress during cutting, extending 18-20 feet depending on the tractor setup.

Goal: The video transitions to the Limbsaw Company booth, where a representative demonstrates hydraulic chainsaw and circular saw attachments for tractors, designed for tree trimming and land clearing.

Tools and materials

  • Limbsaw Circular Saw Attachment
  • Limbsaw LS8 Model (Chainsaw Attachment)
  • Quick-Attach Plate
  • Tractor
  • Hydraulic Fluid

What they say

Hide

that's awesome guys we were with Mike at limsa is that right out of Oklahoma M all right so Mike tell me what you got here I see you got a chainsaw attachment that goes on a tractor bucket yeah this is the ls8 model got a 20-in bar uh got a steal Oiler this is just a show boom it normally comes with the 8T boom uh mount it to any bucket or quick attached plate that you got so this is a this is a plate that goes onto and it's got a little backer right there to keep it from sliding all the way through so this goes on to any bucket you just drill four holes install it in your bucket you still use your bucket is normal then if you want to use a limb saw you just drop it in there tighten down the two set nuts and you're good to go for the limb saw hook that to your hydraulic system right this takes seven gallons per minute seven gallons per minute lubricated by hydraulic fluid and it's a quart an hour you said right about uh no about 200 Cuts per qu 200 Cuts per qu all right cool so well lubricated and you know your hydraulic system and your tractor has tens of gallons in there so now you've got another attachment uh and you can also buy you sell a quick attached plate that you can swap these out right y it's quick attached plate with some receivers to where you can cut on either side of the Box gotcha this is for stuff that's above 5 in it'll cut anything below 5 in but more the bigger stuff with the chainsaw right yeah your smaller stuff uh you would probably want to use the circular saw but got uh this is good you know it's got a 20in bar so you're good up to about 12 in Nice Nice really strong robust you can replace the chain you can order one through limsa or is it limbsaw docomo DOC or you can uh buy one locally you stay with the same SPS nice so this mounts to your bucket uh you guys sell a quick attach plate that'll run both of them so if you want to get both attachments take them out to the field this is for clearing areas on the edges of your pastures and stuff that grow over into where you're mowing so if you ever had your hat knocked off or your cab tractor raked across by some limbs this is the solution to it you can't get a far multure up as high as you can get this this is a 8T boom typically and it can reach up to like 22 25 ft right uh we say 18 to 20 ft depending on what you put it on 18 to 20 ft over here you also have so you've got a chainsaw version and a circular saw version and this is the actual 8-footer so there's a cylinder hydraulic…

Auto-generated from the video audio.