Load the Roller and Apply First Coat (W-Pattern)
At 3:15 in
Learn From a Pro! Paint Your Own Bedroom.
What happens here
Begin by loading your 9-inch roller. Dip the roller into the paint tray and roll it several times to ensure it is fully saturated with paint. Always keep the roller well-loaded; avoid 'dry-napping' (rolling with insufficient paint), as this can create an uneven finish and visible roller marks. Start applying paint to the wall by placing the roller roughly in the middle of a section, then move upwards and downwards to release the paint. Work in sections of about 12 inches wide. Apply the paint using a 'W' or 'M' pattern to ensure even distribution, then fill in the empty spaces by rolling vertically from top to bottom. Maintain very little pressure on the roller, letting the paint do the work. Too much pressure can cause heavy spots that might run. Reload the roller frequently to keep it saturated and ensure quiet, smooth rolling; a hissing sound indicates the roller is too dry. To prevent drips when moving the roller, twist it as you carry it to the next section. If you accidentally drip, immediately wipe it with a wet rag, as wall paint is generally forgiving and can be cleaned off easily before it dries.
Goal: Thoroughly load the roller with paint and apply the first coat to the wall using a 'W' or 'M' pattern, ensuring constant saturation and even pressure to prevent dry areas and drips.
Tools and materials
- Paint Roller (9-inch with cover)
- Paint Tray with Liner
- Wet Rag
- Interior Wall Paint
What they say
(2,497 characters)Hide
What they say
(2,497 characters)Auto-generated from the video audio.