Skip to main content
Stesso

Header Construction Details

0:32
2:00
936.9K views

At 0:32 in

Learn about headers and framing 👍 full video! #framing #headers #learn #carpentry

Watch on YouTube

What happens here

Headers are typically constructed from multiple pieces of dimensional lumber, usually two or three 2x material (e.g., 2x4s, 2x6s), depending on the required strength and the thickness of the wall. These pieces are often sandwiched together with plywood spacers in between. For a 2x4 wall, one piece of plywood is commonly used, while for a 2x6 wall, two pieces of plywood are typically inserted to achieve the correct overall header thickness that matches the wall. This assembly creates a strong, composite beam designed to bear significant loads.

Goal: Learn how headers are constructed for different wall thicknesses.

Tools and materials

  • Framing Demonstration Model Custom-made — To show a constructed header and its components
  • Dimensional Lumber — Primary material for header construction
  • Plywood — Used as a spacer between dimensional lumber to achieve desired header thickness

What they say

Hide

plate. Up here is your studs. These help transfer weight from your double top plate down into your header. These headers are typically double or triple 2 by material depending on your wall thickness, 2 by 4 or 2 by 6, and then they'll have plywood in between. If it's a 2 by 6 wall, you'll have two pieces of plywood sandwiched between three 2 by material. This is common header sizes. This isn't always the case depending on your situation, but this is a good general basis. If you have less

Auto-generated from the video audio.