Reconnect Drain

I like to let it sit for a minute so we've got this tightened up where we want it and now we're working on this part of the drain right so we are going to take probably about a half inch off of this right here and see how that looks so now we'll take this piece slap this nut over it because that's going to go right there this little washer right here is going to go inside sometimes I put a little Mega lock on this these washers especially the rubber ones definitely can be reused get that put there and how I said like this might have to come off well that's what we're going to have to do probably should have just moved removed this whole thing and would have been a lot easier get this right here down inside there that to where we want it this actually looked like it was a pretty good seal I mean it probably was leaking from the top I am just going blind got that one tightened in there so we get that pushed up as far there as we can this is still pretty loose get that up there make sure this is straight get that tight and get that tight except for this piece right here we're gonna have to put the channel locks on that a little bit and now we can give her a test