Skip to main content

Introduction to Kerf

0:00
1:08
229K views

At 0:00 in

Kerf

What happens here

The video starts by highlighting a common issue: a piece of wood cut to a measured length ending up shorter than expected. This introduces the fundamental concept that a saw blade removes a certain amount of material during a cut, known as the 'kerf'. This material removal, if not accounted for, leads to inaccurate dimensions.

Goal: Understand why measured cuts can be inaccurate.

Tools and materials

  • Miter Saw Ridgid — Demonstrating cuts and kerf
  • Wood Board — The material being cut

What they say

Hide

Why is this board shorter than I measured? Let's get after it. That's because your blade isn't infinitely thin. Every time you make a cut, your blade removes material. That width is called the kerf. So, when I mark 12 in, this line isn't where I want the center of my blade. This is the side I want to keep, and I put an X on the side I want to get rid of. Put the edge of my tooth on the waste side of the line. But, here's where things get interesting. Not every blade has the same kerf. Different

Auto-generated from the video audio.