Skip to main content

Compensating for Kerf in Marking

0:04
1:08
229K views

At 0:04 in

Kerf

What happens here

To ensure accurate cuts, you must correctly interpret your measurement mark. First, measure and mark the desired cut line on your wood board using a measuring tape and pencil. Then, identify the 'keep side' (the part of the wood you want to retain) and the 'waste side' (the part you want to cut off). Mark the waste side with an 'X' or another clear indicator. When making the cut, position the saw blade so that its teeth are on the waste side of the marked line. This ensures the kerf is removed from the scrap material, leaving the kept piece at the exact desired length.

Goal: Properly mark and position the saw blade for accurate cuts.

Tools and materials

  • Measuring Tape Milwaukee — Measuring the desired length
  • Miter Saw Ridgid — Making the cut
  • Pencil — Marking the cut line and waste side
  • Wood Board — The material being cut

What they say

Hide

Why is this board shorter than I measured? Let's get after it. That's because your blade isn't infinitely thin. Every time you make a cut, your blade removes material. That width is called the kerf. So, when I mark 12 in, this line isn't where I want the center of my blade. This is the side I want to keep, and I put an X on the side I want to get rid of. Put the edge of my tooth on the waste side of the line. But, here's where things get interesting. Not every blade has the same kerf. Different blades can have different kerfs.

Auto-generated from the video audio.