Install Ramp Attachment Hardware

all right guys so we've got that bracket installed now we've got to install the bracket on the far end to put our ramp on then we'll put it out in the water on the ramp which will be facing this way is a bracket right there this is a six inch bracket that takes a rod through that tube right there so we've got to mount up our brackets on the dock section so that this will Mount up and we'll just slide our pin right through there so the basic gist of this is we have a rubber piece that makes that transition so your dog doesn't get his toenails stuck in there or you don't accidentally stub your toe that will go right here the ramp will be this way so the moving portion will be the longer portion on this awesome little Rubber seal these pieces get mounted right up here along with a little piece of bracketry this again is super simple all we do is drop our nuts right into this groove right here everything's indexed and set up so we can just Bam Bam Bam get it done by by the way congratulations everybody give Flo a special hand pat on the back 40 years their 40th anniversary is coming up guys and we'll be up there in Minnesota for their 40th anniversary if you guys work at flow this video is coming out the day of your 40th anniversary that is so cool and this is my 46th birthday there's a lot of stuff going on here guys [Music] thank you [Music] be sure you torque them to the right spec I've got this drill set to torque them to the right spec right use a torque wrench guys he's got everything torqued to spec for our ramp all we have to do is slide these two big pins I think they're graphite all this stuff is designed to where it'll last for a very very long time and it won't