Install Ground Anchors for Stability

what they've done all right the building's all set up it's complete we'll take you underneath the building we'll show you how the pillars work and we'll take you inside the building so first let's go underneath and I'll show you how often they space the pillars and the system that they use for attaching it to the ground basically to keep a large wind gust from coming in and tipping this thing off of its foundation pier so let's get underneath real quick and then we'll go inside the building and then I'll talk to you a little bit about why we chose this building okay so we're down here on the lower side of the building and instead of just one stack piers on this far corner they did a double stack pier because it'll give it a little more stability if you look up under here you can see the support bracing up underneath there so they put one more right smack dab in the center and that's pretty much it so here's the anchoring system basically what he told me he did is he tightened up this cable as tight as he could get it and they run up underneath these floor supports and then he drove it in the ground so it's tight as a tick it's squeezing into the wood right here so very good job and we have one of those on this end and then one over on that end to have an anchor cost us one hundred and ninety five extra bucks but for the peace of mind if we had a large windstorm I think it's well worth it let's go inside the building so it's a barn door type