Test Hot Water Flow

0:48

1:00

15.3K views

At 0:48 in

Is Your Shower Not Getting Hot Enough? #diy #helpingothers #plumbing #moen

Watch on YouTube

What happens here

With everything reassembled, turn the shower handle to the hot water position and observe the water temperature and steam production. The shower should now provide significantly hotter water, indicating that the anti-scald feature has been successfully adjusted to allow for a greater hot water range.

Goal: Verify increased hot water temperature and flow

What they say

(218 characters)

Hide

This was the issue. Put our sensor on top of our Allen wrench, get that all tightened up. Now we'll give it a test. Yeah, it already goes way further over. That's already starting to steam up nicely for us. Good to go!

Auto-generated from the video audio.

That Fix It GuyAir Force–trained plumber

Brian learned plumbing in the U.S. Air Force and has plumbed his way around the world. Now he films the fixes homeowners actually face: slow toilets, dripping faucets, clogged drains, failing water heaters and disposals. He shows what broke, why it broke, and how to fix it for a fraction of the cost of replacing it. He's particular about the right part, too: no snappy traps, no chemical drain cleaners. His rule: if he can do it, you can do it.

893 videos indexed

Ask Brian About Brian

Also in this video

0:020:07

Remove Shower Handle

0:110:15

Remove Black Valve Cap

0:270:15

Adjust Anti-Scald Rings

0:430:05

Reassemble Shower Valve

0:480:09

Test Hot Water Flow

Playing