Is Your Shower Not Getting Hot Enough? #diy #helpingothers #plumbing #moen

not going to have to shut the water off to make this repair. You're going to take your Allen wrench, you're going to stick it right up in this hole. Go counterclockwise. If you don't hold this because the posi-timp turns on and off this way, you're going to get wet. Hold it clockwise, hold it in the off position, and then start to undo this. You just want to take the black piece with a screw. These two white rings right here are Moin's anti-scaled feature. You just simply remove those. Just make sure these two little knobs are lined up with each other, and you're going to have good hot water flow. This was the issue. Put our sensor on top of our Allen wrench, get that all tightened up. Now we'll give it a test. Yeah, it already goes way further over. That's already starting to steam up nicely for us. Good to go!