Surface Preparation (Sanding and De-glowing)

rest of the house. Make sure you have respirators. Uh we're shooting a film here, so I'm not wearing a respirator cuz I got to talk, but you definitely want to wear a respirator when you're doing any spraying. So, John's got his respirator on uh ready to go. And here we go. Well, prior to any of the painting, we got this all masked off. And this is a semi- gloss trim paint on here. Was a latex trim paint. And we went around, checked it really good for any nicks or dings. sanded any nicks or dings, filled anything with spackle, sanded that with just a 3M sanding sponge, and then uh we went around with our gloss off cuz we want to make sure that we got a good surface that our paint's going to bite and bond to really well. And so we always use a liquid glosser. Right here, we just used a crud cutter liquid de glosser. We typically have several different options to use. We use an M1 deg glosser also, but just make sure you use a deg glosser or you got to sand all your trim to make sure it's going to get a good bite and you have a rough enough surface. Okay, got