Apply for Wide Surfaces (Alternative Method)

3:37

12:02

9.7K views

At 3:37 in

Instant Super Glue? One of the Most Versatile Tools to Keep in Your Tool Belt.

Watch on YouTube

What happens here

When working with wider surfaces that require rapid bonding, an alternative method is presented. First, apply CA glue to one of the surfaces. Next, spray the accelerator onto the other surface. Immediately bring the two surfaces together and press firmly. Then, directly spray the accelerator onto the exposed glue, where the pieces meet. This will initiate an instant cure across the surface. While faster than the 'recommended method' for wide areas, it might not allow for the deepest absorption into the wood compared to letting the accelerator wick in from the edges.

Goal: For wide surfaces, an alternative method involves applying glue to one surface, accelerator to the other, joining them, and then spraying accelerator directly onto the glue for rapid setting.

Tools and materials

Wood pieces (larger
angled for trim)

What they say

(1,446 characters)

Hide

All right, so I'm going to show you how I'm going to glue a couple of pieces of exterior Trim together With this glue all right, so I'm going to put it my glue on one side. I'll spritz my glue with my Accelerant Put them together and see it let it set for a minute It's glued together Just like that. All right So I want to just talk a little bit about the application process of using the glue in the accelerant now the Recommended method for the best bond is to apply a glue to one surface and Then put your surfaces together and then spray your Salarant on the edge of the surface and that's going to give you absorption into both surfaces The accelerant is going to hit the edge work through the glue and eventually create your instant bond Now that's the recommended method now Did just get a really tight instant bond across a wide surface the way I typically do it is I'm going to put my glue on one surface by a accelerant on the another surface touch shows together and I'm going to get a really good bond Now if it's a really wide wide surface that I'm trying to glue together I've also done a method where I put my glue on one surface Spray the accelerant on the other surface and then hit the glue itself with a Salarant touch them together and then you've got yourself a nice instant bond You can see how it's gluing a porous surface together here pretty fast. Now this product it works for a lot of different things I've used it for

Auto-generated from the video audio.