Install Mounting Plate and Bolts

water in it. Now we're ready to mount the brackets and stuff for this seat. Okay, this is where this little template right here comes into play. This works if you have an elongated or a standard size bowl. This is elongated, so it's going to go right up against the edge. And if it wasn't, well then it if it was a smaller bowl, it probably would stick out just a little bit more. You want to grab this bracket, this and you just want to put it right where the setup is. Okay. So, with this seat fastening system right here, you want to keep this screw in there with that little thing of water you just got. You want to dunk this. It's going to slide a lot easier into place if you just get that wet. Okay. And that really just helps put that down there. Pop. They pop and slide. So much easier than if you didn't do that. Get that back to where we need it to go. Make sure that's all lined up. I love that they give you this little template right here. You have to remove the screw because you got to add this little bracket right here. That just sits in like so. Now you'll start tightening down. And then you can see on the bottom as you start tightening this how that goes up into place. And that's it. That's where we're looking at. That's put in. Now, we don't need this anymore. Next, we're going to come over to this toilet seat. We're going to pop the cap off this rotating 90, and we're going to