Skip to main content

Introduction of Tools and Test Setup

0:01
1:07
7.4K views

At 0:01 in

Impact vs drill

What happens here

The video begins with the demonstrator setting up the comparison test. He introduces two Milwaukee cordless power tools: a drill/driver and an impact driver, both equipped with 5.0 charged batteries. He shows the specific fasteners for the test, which are 5/16 x 6-inch lag screws, and a block of pressure-treated 4x4 wood secured to a workbench with a C-clamp. He clarifies that both tools are Milwaukee's non-FUEL models.

Goal: Understand the test parameters and tools involved in the comparison.

Tools and materials

  • C-Clamp — Securing the pressure-treated wood block to the workbench
  • Drill Bit — Driving screws with the drill/driver
  • Impact Driver Bit — Driving screws with the impact driver
  • Milwaukee Drill/Driver Milwaukee — One of the tools being compared for driving screws
  • Milwaukee Impact Driver Milwaukee — The other tool being compared for driving screws
  • Safety Glasses — Eye protection during tool operation
  • 5/16 x 6-inch Screw — The fasteners used for the performance comparison
  • Pressure-Treated 4x4 Wood — The material into which the screws are driven for the test

What they say

Hide

Pressure on my wrist. Which one of these would you use to drive this? Let's get after it. Brand new 5/16 by 6-in Both of these drills are the cheapest that Milwaukee makes. They're non-fuel. We have the drill given maximum torque, speed one, and took the clutch right out of it. I'm going to use two hands. Look at that. pressure on my wrist. Uh, two speed.

Auto-generated from the video audio.