Skip to main content
Stesso

Secure Floating Bunk to Attic Rafters

2:10
57:28
238.1K views

At 2:10 in

I Built A Futuristic Loft Bed For My Kids

Watch on YouTube

What happens here

The presenter enters the attic through a smaller, difficult-to-access opening in a closet. He navigates through insulation and rafters, using a flashlight, to reach the area directly above the bunk bed. After locating the necessary rafter, he secures a 2x4 piece of lumber by screwing it into the rafter and then into the corresponding section of the top bunk's frame. This step is critical for stabilizing the 'floating' side of the bunk bed and ensuring it is safely anchored to the house's structure. The presenter notes the challenges of working in the confined, dark attic space.

Goal: The presenter navigates a challenging attic space to securely anchor the top bunk's unsupported side to the ceiling rafters, ensuring structural integrity for a safe, floating design.

Tools and materials

  • 2x4 Wooden Beam — Used as the securing support within the attic
  • Cordless Drill/Driver Ryobi — Screwing the support into the rafter and bed frame
  • Flashlight — Illuminating the dark attic space
  • Respirator/Dust Mask — Protecting against insulation fibers in the attic
  • Wood Screws — Attaching the 2x4 support

What they say

Hide

inspiration I'm getting is the movie Tron where everything has all these like white etchings. I think that's going to create a such a cool space for a 10-year-old kid that, let's be honest, even a 37-year-old kid like me would probably enjoy being in. I'll put a war cry on our private community called the Builders Lodge for ideas, things I need to incorporate in this bed and I got some really good ideas from all of you there and I can't wait to start executing them. First things we're going to do is start working on the top sleeping platform, get all that reinforced, and uh it'll at least at that point give us a good structural bones to work off of. Of course the battery's dead. Why wouldn't it be dead? We'll do it old school. Find the stud, measure 16 out, and hopefully that'll be

Auto-generated from the video audio.