Skip to main content
Stesso

Construct Side Wall and Plan Attic Access

1:21
57:28
238.1K views

At 1:21 in

I Built A Futuristic Loft Bed For My Kids

Watch on YouTube

What happens here

The side wall of the bunk bed structure is built with 2x4 lumber, framed to fit snugly against the existing wall. The presenter temporarily positions this pre-built framed wall to ensure it fits and allows sufficient space for a door and the bed's overall dimensions. He then carefully measures the height from the bed's base to the ceiling of the top bunk to ensure adequate headroom. The presenter also plans for a second attic access point to facilitate securing the remaining unsupported side of the bed to the ceiling rafters, using an improvised climbing method within the attic space.

Goal: A framed side wall is built and positioned, headroom is measured, and a strategy for securing the remaining bed structure via attic access is planned.

Tools and materials

  • 2x4 Wooden Beams — Framing the side wall
  • Cordless Drill/Driver Ryobi — Assembling the framed wall
  • Safety Goggles — Eye protection during drilling and cutting
  • Step Ladder Gorilla Ladders — Accessing higher points for measurement and installation
  • Tape Measure — Measuring headroom and overall dimensions

What they say

Hide

thinking. We're going to have a loft bed on top here, get some cool little intricate patterns and designs. Uh this part was going to be floating, and then down below we're going to use this wall there. We're going to have like a TV there, a nice wrap-around desk right there. I want to keep this part open so you can walk in from here, but we're going to need to suspend like a post there connected to our rafters to keep it flowing. This part was going to be reinforced there. And [snorts] then what I want to do is I want to have to kind of create that spacecraft kind of look. I want some backlighting, right? So, I want some stuff to stick out more. I want LED strips inside these contours. So, they're kind of putting out light. Basically, anything that has these weird patterns and shapes of like cabinets, they're all going to have backlighting on it. Essentially, it's like the inspiration I'm getting is the movie

Auto-generated from the video audio.