Skip to main content
Stesso

Enclose Structure with MDF Panels

5:17
57:28
238.1K views

At 5:17 in

I Built A Futuristic Loft Bed For My Kids

Watch on YouTube

What happens here

After all the electrical wiring is installed, the presenter attaches the remaining MDF panels to enclose the structure. These panels are cut to fit the various angles and curves of the design, creating a seamless, futuristic shell. The installation of the side panels, back panels, and the front face of the top bunk is shown, often requiring custom cuts and careful alignment. Once all panels are secured with screws and brad nails, the structure is fully enclosed, ready for the priming and painting stage.

Goal: MDF panels are precisely cut and attached to fully enclose the bed structure, creating a seamless, futuristic look ready for finishing.

Tools and materials

  • Brad Nailer Ryobi — Attaching MDF panels
  • Circular Saw Ryobi — Cutting large MDF panels
  • Cordless Drill/Driver Ryobi — Driving screws
  • Jigsaw Ryobi — Cutting curved or intricate shapes
  • MDF Panels — Enclosing the bed structure
  • Wood Glue Titebond — Strengthening joints

What they say

Hide

>> It's crazy how building a bed is quickly turning into like framing a house. We got a wall right here. Not quite 16 on center, but we don't need it to be that over built. Going to cut into the trim baseboard, and this should fit snug as a bug on a rug.

Auto-generated from the video audio.