Skip to main content
Stesso

Erect A-Frame Walls and Set Ridge Beam

2:22
22:36
121.6K views

At 2:22 in

I Built a 2,000 Sq Ft Cabin With Zero Experience!

Watch on YouTube

What happens here

The construction of the A-frame cabin's unique walls and roof structure begins with erecting the pre-fabricated A-frame walls. These large wall sections, often sheathed with OSB, are lifted into place and secured. A critical step involves lifting and setting the massive 64-foot, 5,000-pound glulam (glued laminated timber) ridge beam, which runs the entire length of the cabin's peak. This task requires heavy lifting equipment, such as a telehandler (a glorified forklift) or a crane, to carefully maneuver the beam into its final position on top of the A-frame walls. The workers use various hand tools and a drill for final adjustments and securing the beam.

Goal: Construct the main A-frame structure and install the central ridge beam.

Tools and materials

  • Cordless Drill/Driver
  • Glulam Ridge Beam
  • Ladders/Scaffolding
  • Measuring Tape
  • Pre-fabricated A-Frame Wall Sections
  • Telehandler (or Crane)
  • Fasteners (Nails/Screws)
  • Tie-down Straps/Slings

What they say

Hide

fast and quickly as they could. Now, the biggest problem we ran into through this entire process was the structural design of this A-frame. The architects designed it where it has what's called a ridge beam. that is a glue lamp, meaning they just glue together a bunch of 2 by10s together to create this one giant beam. The beam runs completely across. It's 64 feet long and weighs 5,000 lb, which means we had to go get herself a rental crane. Well, the troubles didn't stop there. When we hired the crane, we told them situation and the layout of the land. And after crunching their numbers, they realized that they could not actually get the crane to lift the beam exactly where they want without being a risk concern. way more than I could lift from that distance. >> Luckily enough, we're able to use our tandle, which is a glorified forklift to lift the beam up in the air and set it right into place. We were just at the right weight capacity in order to accomplish this tilting. No, no, no, no, no, no, no. One thing to also avoid if building this

Auto-generated from the video audio.