Skip to main content
Stesso

Setting Up a Plumb Bob for Vertical Reference

0:24
1:16
187.6K views

At 0:24 in

How to use a plumb bob

Watch on YouTube

What happens here

To use a plumb bob, first adjust the length of the string so that the heavy weight (the bob) hangs freely without touching the ground or any obstruction below. Then, tie or secure the string to a stable reference point directly above the area where you need to establish a vertical line. Once secured, allow the plumb bob to stop swinging completely; gravity will naturally pull the weight straight down, providing a true vertical reference.

Goal: Establish a true vertical line using a plumb bob.

Tools and materials

  • Plumb Bob Unspecified — Establishing the vertical line

What they say

Hide

down, giving them a vertical reference. And that's eventually where we got the word plumb for something that's perfectly vertical. And for Bobby you might ask, that's not some dude. That's just the name of the weight at the end of the line. Set your length so the weight hangs freely without touching the ground. Tie your string to a reference point, then just let gravity do the work and wait until the bob stops swinging. Now we can check if this board's actually plumb. First we'll measure from the top, inch and an eighth. The bottom, 8 in. We got to move this 2 by 4 quite a bit that way. Now that we straightened it out, our bottom

Auto-generated from the video audio.