Skip to main content
Stesso

Painting Garage Doors and Associated Trim

4:35
7:06
125.3K views

At 4:35 in

How To Stain A Wood Sided House. Stain A House In One Day.

Watch on YouTube

What happens here

The garage doors, which were already meticulously masked off with 1-inch tape, 9-inch paper, and 72-inch masking film using a hand masker, are now being prepared for painting. The presenter explains that the doors will be sprayed with a Sherwin-Williams Resilience satin paint, rather than stain. The strategy is to allow paint overspray onto the trim areas, which will then be painted a different color with solid color stain for a clean finish. Once the main surface of the garage doors is painted and dry, they will be raised to paint the bottom edges, and finally, the solid color stain will be applied to the trim.

Goal: Paint the garage doors with satin paint and prepare for trim painting.

Tools and materials

  • Extension Pole for Sprayer — Reaching all parts of the garage doors, especially the upper sections
  • Hand Masker — Applying masking film and tape quickly and efficiently
  • Paint Sprayer Graco — Spraying satin paint onto garage doors and solid color stain on trim
  • Respirator Mask — Protection from paint fumes and overspray
  • Safety Glasses — Protecting eyes from paint droplets and overspray
  • 1" Tape — Masking off edges around the garage doors
  • 72" Masking Film — Masking off large areas like garage door panels or entire doors for protection
  • 9" Paper — Masking off surrounding surfaces to prevent overspray
  • Resilience Exterior Acrylic Latex — Painting the garage doors, offering durability and a smooth finish
  • Solid Color Stain Sherwin-Williams — Painting the trim around garage doors, complementing the main color

What they say

Hide

So, we started staining this house about 7:00 this morning. It's about noon time, about halfway done. We got the whole front side done, two sides of it done, working our way around the back. We got these two garage doors. We're actually going to sp paint them a semi or uh satin stain, a satin paint from Shervin Williams, and we're going to be showing you that process here, too. Okay, we sprayed this stain all around these doors. Now I'm going to go and spray them with the satin paint. Got it masked down on the ground with uh 9in paper, 1in tape. And don't need to worry about the edges of it. Masking the edges cuz we're going to be trimming the doors out and the stain so we can get the paint oversprayed right on the trim. And we'll just raise the doors up. When that dries, go back and put the solid color stain around the trim. [Music] Heat. Heat.

Auto-generated from the video audio.