Skip to main content
Stesso

Implement Proper Spraying Technique and Overlap

2:43
7:00
28.2K views

At 2:43 in

How to Spray Interior Walls Without Lap Marks | Flawless Airless Finish Tips

Watch on YouTube

What happens here

To achieve professional results, always start spraying from a logical point, such as a corner, rather than in the middle of a wall. As you spray, maintain a consistent 50% overlap with each pass, especially important for ceilings and walls. Focus intently on the paint as it hits the wall; you should visually confirm a nice, wet coat that is not too thick (to avoid runs) and not too thin (to avoid dry spots). Additionally, listen to the sound of the paint coming out of your gun to detect any issues like spitting or hissing, which could indicate a blown tip. Adjust your spraying speed as needed – slow down if the paint looks too dry, and speed up if it appears too wet to prevent runs. With practice, these adjustments will become second nature.

Goal: Adopt a proper spraying technique, including logical starting points, consistent 50% pattern overlap, and continuous observation of paint application.

Tools and materials

  • Gun Extension
  • Paint Sprayer Gun

What they say

Hide

walls. The next tip I'll give you when it comes to spraying walls and having success is spraying the walls and utilizing good technique and um good pattern overlay. I'm going to start someplace. I don't want to start ever in the middle of a wall. I'm going to start from a logical start and stop over here. The corner is a logical start and stop. I'll start working around the room this direction. I'm going to start in the corner. I'm going to begin overlapping 50% as I go. Doing ceilings and walls, a 50 over a 50% overlap is extremely, you know, important. As you're spraying, what's really, really important is you are actually seeing the paint hit the wall. So, you have to be, you know, 100% focused. You have to see the paint. You have to hear the paint coming out of your gun. Is your tip blown out? Is it hissing? Is it spitting? You got to understand what's going on. You got to be very focused. I'm overlapping 50%. I see that I overlap 50%. It looks super wet. It's not too much. It's not too little. If it looks a little bit dry, I probably need to slow down my speed a little bit. If it looks a little bit wet, like, wow, I might get a run. I'll speed up a little bit. So, I make those adjustments and you'll eventually um you'll just know right off. It'll be just second nature. As soon as you start, you'll know exactly if you don't have any experience at all. It takes a little bit of time, but you'll figure it out. 50% overlap. I'm seeing it as I'm working down the wall. I'm looking down the wall out of my perial per peripheral vision. Do I look like I have a nice wet coat all the way down the wall? Or if my overlap was too much, do I have some like like light dry spots in the walls? That's going to cause you issues. Keep your 50% overlap consistent, keep your speed s consistent, and you'll have some success. So, the last tip I'll talk

Auto-generated from the video audio.