Skip to main content
Stesso

Preparing the Door for Painting

2:45
15:24
59.3K views

At 2:45 in

How to Spray Doors With SUPER STACKERS!

Watch on YouTube

What happens here

Before painting, use an orbital sander to lightly sand the surface of the door. This helps to create a smooth finish and promotes better paint adhesion. After sanding, wipe down the door with a cleaning cloth to remove any dust or debris. Place the door on sawhorses, ready for the initial coat of paint. The presenter also demonstrates using a gun extension on the paint sprayer for better reach and a respirator mask for safety.

Goal: Prepare the door surface for an even paint application

Tools and materials

  • Cleaning Cloth/Rag — Wiping dust and debris from the door
  • Orbital Sander — Sanding the door surface for smoothness
  • Paint Gun with Extension — Applying paint with extended reach
  • Paint Sprayer Titan 410 Impact — Applying paint to the door
  • Respirator Mask RZ Mask — Protecting against paint fumes
  • Safety Glasses Edge — Eye protection during painting
  • Sawhorses — Supporting the door during preparation and painting
  • Paint — Coating the door
  • Sandpaper — Sanding the door surface

What they say

Hide

and get this door sprayed okay when installing your super stackers there's kind of these little um nipples on the ends of the super stackers right here the tops of them and you all want to have them either up or down because that's going to set inside of the opposite side of the super stacker and it sets right in there and that's what gives it the ability to on the stability to stay where it's at and be stackable so all your super stackers need to be um up or down so we've got a super sector right here that one is up and one is down and you don't want that so we'll just flip this around all right we're gonna install the super stackers on this door now so once again you can stick holes outside or inside i'm going with

Auto-generated from the video audio.