Warm Up Engine and Prepare for Draining

What happens here

Start the UTV and let it run for a few minutes to slightly warm the engine oil. This helps the oil drain more completely. Ensure the engine is not too hot to avoid burns. Place an oil drain pan directly beneath the drain plugs. Using a razor knife, cut a piece of cardboard to act as a guide. This guide should be wider than the drain holes and long enough to extend past any chassis components, directing the oil from the drain plugs cleanly into the pan.

Goal: Briefly warm up the engine to aid oil flow, then position the oil drain pan and fashion a cardboard guide to direct oil to avoid spills.