Reinstall Oil Drain Plug

10:50

18:01

100K views

At 10:50 in

How to Service a Dodge Ram 5.9 Cummins! Detailed..no nonsense tips and tricks.

Watch on YouTube

What happens here

After draining the oil, wipe around the oil drain hole and the plug with a clean rag. This helps identify any existing leaks and ensures a clean surface for the new gasket seal. Carefully reinstall the cleaned oil drain plug by hand, ensuring it threads smoothly without cross-threading. Use the 3/8 inch drive ratchet with the appropriate socket to tighten the plug. Tighten it securely, but do not use excessive force (no "gorilla tight") to avoid stripping threads from previous services. There's no specific torque spec given, so apply a firm, but not extreme, tightness.

Goal: Securely close the engine oil pan.

Tools and materials

Socket for Oil Drain Plug Craftsman — Fitting the oil drain plug
Rag — Wiping around the oil drain plug area

What they say

(1,388 characters)

Hide

you get back under there to tighten that oil plug drain be sure you take a rag with you you want to wipe around and make sure it's all clean and make sure the guy before you or the guys ten times before you didn't squeeze RTV on it or make a huge mess down there before because you don't want a dripping oil plug drain because somebody before you stripped out the threads here's where my truck may be a little bit different than your truck I have an aftermarket air cleaner so basically we're going to remove the hose from our aftermarket air cleaner we're gonna remove the hose from the turbo and I've already pre loosened this so hopefully it comes off we'll take this guy out of here these trucks with automatic transmissions have a notorious problem with interference with the ground so this is a ground wire that the interference comes from it's a alternator wire that picks up some sort of interference and causes the transmission to shift strangely in other words it jumps between gears I've seen guys take aluminum foil and wrap around this wire and it stops the problem we put two new batteries in here and it stopped the problem I taught to another guy it's got a 24 valve like this and basically every six months Jiri wraps this with aluminum foil and it stops the shifting issue pretty crazy we've got our special tool we got our new napa gold and again guys this thing should

Auto-generated from the video audio.