Unload Paint and Form W-Pattern

1:37

7:41

121.3K views

At 1:37 in

How To Roll A Wall. Laying Out Interior Walls. Tips from The Idaho Painter.

Watch on YouTube

What happens here

With a fully loaded roller, begin by placing it on the wall, typically in the middle of a section, and make a vertical stroke downwards to 'unload' a good amount of paint onto the surface. From this initial stroke, immediately start forming a 'W' or 'M' pattern across the wall section. This method helps to distribute the paint evenly over a larger area initially. The presenter advises facing the roller's frame towards the direction of movement to ensure the roller stays securely on the frame and doesn't roll off, especially when applying pressure. This method prevents the roller from 'working off the frame' during application.

Goal: Evenly distribute paint on the wall using a 'W' or 'M' pattern.

Tools and materials

Loaded Paint Roller
Paint (Primer)

What they say

(970 characters)

Hide

roller from your pan to the wall so I'm going to load it up now I'm going to transfer it to my wall moving it and I like to and this is just me I like to take my roller and set it right in the wall and I begin unloading my roller at that point in time now some people are very particular about the direction their roller faces when they're actually rolling cuz if if I'm rolling in this direction it's pushing the roller onto the frame if I'm rolling like this and going this direction if you're really pushing really hard and you're what we're called dry napping you could work your roller off the frame and I do have to say uh in my career um a couple times I've actually rolled a roller right off the frame and it did fall off and so what I like to do is set my roller right in the middle and I'm going to face it always to my left and I'm going to begin unrolling from a top to bottom motion until my paint is evenly distributed on that wall in that section now that

Auto-generated from the video audio.